Login Register

Chapter 149: 148. Meteor Sword

1.


Seren had been successfully placated once again.


Word was that the Imperial Family would soon be climbing the Tower again... It seemed she had been feeling unsettled ahead of the large-scale expedition.


I wrapped things up by telling her that I hoped she would wear the armor I made for her well and soar high.


But at this level, she was actually pretty cute. If I had to rate it, she was about Disaster Grade C.


I rather liked it, honestly. Correcting her was satisfying.


As for S-rank... well, never mind.


I had once been trapped in a life-or-death battle.


I never wanted to do that again.


Anyway, I shut the workshop door...


Now it was time to get down to work in earnest.


Making a sword was no easy task.


There were so many kinds of swords... To give a brief rundown, there were these.


Daggers, blades specialized for thrusting... You should never underestimate them just because they are small.


Generally, when you go stab, stab, a dull edge apparently will not go in.


Next came shortswords, then longswords, then greatswords...


Seren used a greatsword.


There were also rapiers, which had narrow, thin blades and were specialized for thrusting, but those were more Western-style swords.


In that sense, the sword Cordelia had used until now was a longsword.


All the movements in the footage had been tailored to that kind of sword.


The broken sword she had sent me was the same. Its grip had worn down in a way suited to holding a longsword.


But...


"What if I take a different approach?"


If I did things Lionel's way.


I had kept thinking that I wanted to give her a katana.


And that idea...


Had come to me while watching the way Cordelia swung her sword.


Rather than meeting her opponent's blade head-on and holding her ground, her basic style was to deflect it.


Deflect, slip in, and when she seemed merely to graze past them, she simply cut through them as she passed.


...Lightning Flash? Cutting in Two with One Stroke?


You know the kind of thing.


Given Cordelia's nature of cutting through her opponents as she passed...


I wanted to make the most of those fleeting moments of contact.


"An edge so sharp that it cuts with the slightest brush."


The difference between a katana and a longsword was, above all, their edges.


A katana had a curved, single-edged blade, whereas a typical longsword was double-edged.


In other words, a katana's cutting power on its cutting side was much greater.


That was why I wanted to put a katana in her hands.


My goal was to reduce the weight while raising its cutting power to the level of a nanocutter.


"And she gave me permission."


Cordelia had given me the okay.


So I should get started, right?


The basic method for making a sword was forging.


Heat an ingot and hammer it into shape.


The whole clang, clang thing.


Why not just pour molten metal into a mold?


That was called casting...


But it was a Bronze Age technique. Wasn't it time we let that one go?


It was not a method suited for swords. Forging was the right choice.


Especially this time...


─────────────────


[Lost Star: Asterium] [★★★★★]


[Divine Material]


─────────────────


[Restoration has been completed.]


[Its original name and sealed innate traits have been unlocked.]


─────────────────


[An ingot refined by a god beyond the heavens to forge their armament.]


[After losing its starlight, it wandered the celestial realm before falling to the earth.]


─────────────────


『One god is still searching for the vanished ingot... no, the star.』


─────────────────


I already had a perfect ingot.


Click.


I opened the furnace lid.


The fire was always burning. All I had to do was adjust its intensity.


"I look forward to working with you again today."


I did not know whether Ignia was listening, but it never hurt to offer a greeting.


With my tongs, I gripped Asterium and pushed it into the flames.


Whoosh...


Flames curled over its silvery surface.


It struck me again... Without Ignia's flames, I did not think that ingot would have melted.


Not ever.


"Yuna, put up the draft beside it."


[


Hum


]


A hologram of the sword appeared before me.


It had a gently curved blade and a long handle, but...


Tap.


I separated the hologram's handle and blade.


You did not make them joined together from the beginning.


They had to be joined later, after all. That was why the end of a katana blade had something called a tang...


It was the portion where the handle was fitted on—a part designed and forged into the blade from the outset.


There was no edge from that point onward.


Then...


"...Wow."


The ingot in the fire began to shine.


I had expected it to glow red, but its surface began gleaming pure white.


It felt as though its temperature had risen in an instant.


I carefully tightened my grip on the tongs.


"...Come out."


Shhk.


I took out the heated ingot and set it atop the anvil.


Thunk!


A heavy sensation reverberated through my hand.


Then...


Whooom, smack!


Dawn Bringer flew into my right hand.


The divine ingot was held in the tongs in my left.


"..."


The corners of my mouth slowly curled up.


A proper armament made through forging... I had really only practiced making one. This was almost my first time.


I'll make good use of it, nameless god.


Clang!


The first strike.


"...!"


The hammer bounced back.


A tingling impact ran from my palm all the way to my elbow.


I stood there blankly, hammer in hand, and looked down at the ingot.


Its surface had been indented ever so slightly...


Was the temperature too low?


Not at all...


Then...


"I'm the one who's lacking."


I had never thought it would turn itself into a sword on its own.


In the end, the person swinging the hammer had to be good enough.


Because I was a blacksmith...


Shhk, shhk.


Still gripping the hammer, I pulled out bandages and wrapped them around my palm and wrist.


It would be best to abandon any thought of putting down the hammer from this point on.


All right.


"...Hoo."


Clang!


Clang! Clang!


There was no need to strike the same spot repeatedly. Move slightly to the side each time, by a centimeter.


You could not just hammer it once and have it stretch right out. This was not a game.


Instead... little by little, in proportion to my effort...


The edges of the ingot were flattening.


"..."


That was enough.


Clang! Clang!


After hammering for a while, the resistance beneath my hammer changed.


The ingot, which had been gradually giving way, began to resist. That meant...


It had cooled down. Ordinarily, blacksmiths only had about a minute after heating metal in which they could hammer it.


The Sun Dwarves, the Heirs of Fire, called that golden span of time a "breath."


All right, its breath had stopped.


No matter how much I hammered now, the metal would no longer stretch.


So what was the solution...?


Whoosh!


I clung to Ignia's coattails and heated it again.


The textbook said it took around sixty cycles to turn an ingot into a single sword.


But that was by an ordinary blacksmith's standards.


The Heirs of Fire had greater precision in every strike, so their standard was around ninety cycles.


However...


Clang!


Even that was only true of ordinary iron.


I was attempting to work with divine material.


"...Hoo."


So I cooled it, heated it, and hammered it.


I went through roughly one hundred and fifty breaths.


Five hours had passed...


"..."


I raised the tongs and lifted the result to eye level.


In place of the heavy ingot I had begun with... I saw a long, stretched-out mass of silver metal.


One side was broad, while the other was thin.


They would become the blade and the tang that would go inside the handle, respectively.


"It isn't... a sword yet."


Yeah, it would be unfair to call this a sword just yet.


It did not even have an edge yet, so what was I thinking?


There were even faint hammer marks left on the surface.


And it was only beginning now.


"Yuna, overlay it."


A hologram containing the outline of the sword I had initially designed was overlaid on the metal mass in front of me.


"...Good."


It was time to begin the fine control.


Thud.


I heated the metal mass again and immediately took it out.


Make the section that would become the spine thick, and the section that would become the edge thin.


Clang!


From now on, I had to replicate the shape of the blade perfectly.


Gently... delicately, like a slide descending from the outside inward.


Then I flipped it over and did the other side too.


I could not let it slide just because it looked roughly similar... A sword was a sword.


I had made it light, so I already had to focus intensely on the feel of it... There could not be a single part I handled vaguely.


Then...


Whoosh!


I threw it back into the fire.


"..."


While it heated, I stretched out my fingers. Beneath the bandages, they were damp.


I was not looking at that area right now... This was sweat, right?


For now, I decided to believe that.


How many more times did I heat and hammer it like that...?


Clang.


With the final hammer blow, I set down the hammer.


"...Done."


The outline and contours before me aligned cleanly with the hologram.


Afterward, I ground down and smoothed out the rough surface, then finished the heat treatment.


I had described the heat treatment simply, but it was an extremely important part.


Because forged metal accumulated stress from being heated, it had to be cooled slowly in the air first...


Then reheated to the critical temperature.


Ssssssizzle!!!


And rapidly cooled in oil.


The metal became extremely hard, but also brittle as glass...


Would I stop there?


Then it would end up like that sword Ruby killed with her staff.


It would get wrecked.


The final step was reheating it at a low temperature to reduce its brittleness.


This sacrificed a little hardness, but gave it the quality of bending without breaking.


Since the material was what it was...


The silver blade was complete. All that remained was...


"The edge."


The most important part of something meant to cut.


I pulled the whetstone right in front of me.


The one I would use as a whetstone was...


─────────────────


[Growth Stone] [★★★★★]


─────────────────


[An ore lost in the deepest part of the Great Forest.]


[It absorbed vitality beneath the roots of the World Tree for many years.]


[When supplied with mana, it regenerates damaged portions to their original shape.]


[Its regenerative property remains even when fused with other metals.]


─────────────────


『Even if it breaks, it does not die.』


─────────────────


This fellow.


This Growth Stone had extremely even particles and a uniform grain.


Of course, that was what had been revealed after stripping away the moss growing on its surface.


Green particles were embedded evenly throughout it.


In other words, it had more than enough value as a whetstone.


"...If it gets ground down."


My plan was to feed the Growth Stone powder that flaked off when it met the blade into the edge.


As I sharpened the blade, I would simultaneously imbue it with regenerative properties.


The edge was the thinnest part of a sword, yet also the part that endured the roughest impacts.


I did not want Cordelia to hold back when she swung her sword just because its edge might dull or chip.


"As much as you want."


Use it as much as you wanted.


Any chips... would be taken care of by the Growth Stone's energy.


Splash!


I poured water over the Growth Stone.


Let the whetstone soak up water. That was just basic common sense.


Shhhk... shhhk...


I pushed the blade across the Growth Stone.


Silver and pale green powder mixed across the surface of the blade, but...


Shluk...


The pale green powder seeped into the blade and disappeared without a trace.


Perfect.


I worked pale green powder into every part of the edge, making sure it permeated evenly.


Shhk... shhk...


I sharpened it, then inspected it under a luminescent stone.


After checking the surface, I sharpened it again.


Back when I was a cook in the military, I sharpened a whole lot of knives. No joke, it helped quite a bit.


Shhhk...


And now...


Twitch.


Should I make one more pass?


"...This is enough."


Splaash!


I poured the remaining water over the blade.


Splaaash...


The caked-on powder washed away.


Beneath it, silver gleamed into view.


"..."


I held the tang with my tongs and lifted it.


Light slid smoothly along the blade as it caught the firelight.


The truly interesting thing was...


"How strange."


The comet-like marking engraved on the ingot remained embedded in the blade no matter how much I hammered it.


A certification mark?


Well, that was nice.


All right, then.


"Hoo..."


I should test it, right?


Was the edge perfect?


Ideally... I would like to cut up a monster or something.


But for now, I would settle for what I had prepared.


Still holding the tang before the handle was attached in my tongs, I aimed at the stacked hides of a speckled cow hanging in front of me.


I had stacked roughly twenty sheets and secured them tightly... It probably would not cut through them easily.


"Just how tough is this?"


I asked Yuna to convert it into numbers.


[Numerically... Hmm... This is leather the Company uses to make two-star armor, and factoring in the treatment you gave it... fifty-six suits of two-star leather armor?]


...I get the general idea.


I adjusted my grip on the tongs with both hands.


First, I intended to set the edge against it and check the resistance. With my heart pounding...


Tap.


I set the edge atop the layered hides.


"...Huh?"


I had said it all along, but this sword had been designed to be exceptionally light.


It was far from the sort of weapon that battered things with its weight.


And yet...


My hand was pulled downward.


Riiip!


With only the blade's own weight, without me applying any force at all, it sliced straight through the leather.


In the instant the silver edge cut straight down through all twenty layers of hide...


"Hey, hey, that is insane..."


Ding!


─────────────────


[The requirements for qualification as an armament have been fulfilled.]


[Appraisal of the completed blade will now begin.]


─────────────────


It did not even have a handle yet...


─────────────────


[Meteor Sword] [★★★★☆]


[Unique Equipment] [Compatibility] [0 / 100]


─────────────────


『A sword born to cut stars.』


『It makes no difference even if a god's name follows the word star.』


─────────────────


[Meteor]


[A blade forged from the divine material Asterium.]


[Achieves high cutting power in an extremely light blade.]


[Without a handle, it cannot fully display its original performance.]


─────────────────


[Immortal Edge]


[The regenerative power of Growth Stone has fused with the blade.]


[When supplied with mana, it restores wear and damage.]


[Even if chipped or dulled, it regains the edge it was first forged with.]


─────────────────


『The lost star returns as a blade. Someone had better be careful... Hahahaha!』


- Archeon, Wandering God -


『It has no handle, so it is not a sword? What nonsense... If it can cut, it is a weapon from that moment on.』


『It exceeded my expectations, blacksmith.』


- Ares, God of War -


『Hyperion, you are unbearably arrogant.』


- Gaia, Goddess of Earth -


─────────────────


Four stars.


Praise from the gods.


A regenerating edge.


Sure, fine. A sword that cuts stars, all that was great.


This was even the first time I had seen Gaia this angry.


But... if there was one most important point.


"..."


I looked down at the tang I was holding with the tongs.


There was no handle.


'I am not finished yet, though...?'


As it stood, I had only made it halfway through crafting the sword.

Comments (0)

Ch. 149: 148. Meteor Sword
Font
Theme

Report Chapter Issue

Select an issue type and send your report.